13 Things About Saab 93 Key Fob You May Not Have Considered

How to Replace a Saab 9-3 Key

The Saab 9-3 is an excellent car that offers a lot of appeal for drivers. It is a powerful engine with excellent visibility. It also has a high safety rating.

However, it is important to make sure that you have two working keys for your vehicle. It is costly to replace a key in the event that you lose it.

How to replace the ignition Key on the Saab 9-3

You'll must replace your car keys when it doesn't turn. This guide will show how to replace the ignition key on the Saab 9-3. You'll require a replacement key with a reprogrammable battery, and a new key-fob cover.

The majority of modern Saab models utilize a transponder instead of a key made of metal to unlock the car and start it. The problem with this is that the reprogrammable battery inside the key-fob eventually wears out and not hold a charge for long. This is particularly when you use the same key for the same lock.

A professional locksmith can change the battery quite easily. If you have the right tools, and a little patience, you can do it yourself. The first step is to remove the key-fob. This is accomplished by inserting a flathead screwdriver into the slot that is located in the middle of the case. You must work slowly, since the plastic is extremely thin and can be damaged easily.

When the case is opened then you can prepare the new key by combining the lower section of the key that was used previously with the banana and transponder on the new key. This will ensure the new key is properly paired to your CIM and can make a big difference when replacing the sole keys for your Saab 9-3.

How do you replace the ignition Key on the Saab 900

If you don't have two keys, you'll have to remove the steering wheel and dashboard to access the ignition. Start by disconnecting your negative battery cable. Once the battery is disconnected, you are able to remove the trim and dashboard pieces around the steering wheel. After the dashboard is removed, you can insert a screwdriver into the hole behind the ignition switch and take it out.

The ignition cylinder is equipped with a key lock which can prevent the vehicle from starting if you don't have the key in it. If your 900's ignition switch isn't working, look at the key to determine if it's in the lock or in the barrel of ignition. It's also an excellent idea to rotate your keys often and clean them regularly so that one doesn't get bent.

Saab cars differ from other cars because they do not use traditional metal keys. Instead, the car can recognize the key fob's electric signals by a specific chip inside it.

If you lose only one working key fob, the dealer will charge you the most expensive dollar to replace the computer module (known as the CIM). However, we can reprogram the existing computer's EEPROM to prepare it to accept new keys without replacing it. This will save you up to 50% of what the dealer charges! This is the SAAB KEY PROGRAM. Find out more about it here!

How to replace the ignition Key on a Saab 9-5

The metal part of a classic Saab key is easy to copy, and is not a major obstacle against vehicle theft. The electronic component of the key-fob comes with an electronic chip that detects the car when the key is inserted in the ignition switch.

Saab has relied on the technology of this anti-theft device for more than a decade. It's not as good as an actual lock on the door but it makes the act of stealing your car more difficult. Every Saab owner must keep an extra Saab key in their vehicle.

The majority of new Saabs are delivered with two keys, but they can be added at the dealer's expense using a handheld device called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is the NG 9-3 cars, which are equipped with modern, more advanced features that require a separate key-fob to operate using a different procedure.

If you lose all keys and the dealer replaces your CIM or TWICE modules and bill you the cost of replacement. However,  saab car keys  can reprogram the EEPROM in your existing computer and make it accept new keys, without having to replace the expensive modules.

How to replace the ignition Key on a Saab XC90

It could be time to replace your SAAB key fob if you're experiencing issues turning the barrel of your lock. The procedure is quite simple and you don't need to visit a dealership. You can do it at home, using a couple of simple tools.

It is first necessary to prepare the new keys. Before you begin, turn off the anti-theft by placing blocks under your rear wheels and releasing your handbrake. Insert the key into the ignition, and then turn it to the "on" position. This will activate the accessories but will not start the engine. Repeat this process five times and leave the key in the on position.

Then you'll need to buy a new case for your key fob. You can find these at any auto parts shop, and they're typically quite affordable. Depending on the model, you can even purchase them without electronics.

To open the case, gently push the flathead screwdriver into the slot in the middle. The case should break easily, and when you've got it open, you'll get access to the internal electronics. To get rid of the electronics, use a small flathead screwdriver and try prying them out gently.